Dental discoloration alginate impression materials

the dental discoloration alginate impression material is suitable for making impressions of teeth and oral tissues.

~~$3.50~~ $3.00

Description

Usage:
The material in the bag should be shaken evenly before use
Powder to water ratio: 10g: 22ml (recommended to use a special measuring spoon and measuring cup for Haijiya);
Reconciliation time: 30 "~45’’
Working time: no less than 1'30"
The temperature box hardness of the blended water will directly affect the above time. It is recommended to use 23°C deionized water.
Rinse with water to remove saliva and debris from the impression, and cast the plaster model immediately.
Use type 3 or type 4 gypsum tank to inject gypsum model in accordance with ISO6873 requirements.
Please place the product at a temperature below 30°C and a humidity below 80%. The bag should be sealed immediately after opening to avoid moisture.

Test ltem	ISO21563	Chromatic
Powder water proportion		10g/22ml
Mixing time	Factory stipulation	30''
Total working time	Factory stipulation	≥1' 30''
Time in mouth	Factory stipulation	1'
Detail reproduction before and after disinfection	20μm	20μm
Reappearance	50μm	50μm
Elastic recovery	≥95 %	97 %
Permanent deformation	5~20 %	16 %
Compressive strength	≥0.35 Mpa	＞0.5 Mpa
Tear strength	≥0.38N/mm	＞0.38N/mm

Customer Reviews

Write a review

Sign In With:

Dental discoloration alginate impression materials

Quantity